Tjernlund UC1 Universal Control (Version X.02 or Earlier) 85 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Tjernlund UC1 Universal Control (Version X.02 or Earlier) 85 herunter. Tjernlund UC1 Universal Control (Version X.02 or Earlier) 8504107 Rev 08/02 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 14
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Copyright © 2002, Tjernlund Products, Inc. All rights reserved P/N 8504107
OWNER INSTRUCTIONS, DO NOT DESTROY
Recognize this symbol as an indication of important Safety Information!
THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED, LICENSED
SERVICE PERSONNEL FOR PROPER INSTALLATION, ADJUSTMENT AND
OPERATION OF THIS PRODUCT. READ THESE INSTRUCTIONS THOROUGHLY
BEFORE ATTEMPTING INSTALLATION OR OPERATION. FAILURE TO FOLLOW
THESE INSTRUCTIONS MAY RESULT IN IMPROPER INSTALLATION, ADJUST-
MENT, SERVICE OR MAINTENANCE POSSIBLY RESULTING IN FIRE, ELECTRI-
CAL SHOCK, CARBON MONOXIDE POISONING, EXPLOSION, OR PERSONAL
INJURY OR PROPERTY DAMAGE.
!
DO NOT DESTROY. PLEASE READ CAREFULLY AND
KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
MODEL UC1
INSTALLATION INSTRUCTIONS
REV. 8/02
TJERNLUND PRODUCTS, INC.
1601 Ninth Street • White Bear Lake, MN 55110-6794
PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547
Visit our web site • www.tjernlund.com
VERSION
X.02 OR
EARLIER
Seitenansicht 0
1 2 3 4 5 6 ... 13 14

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

Copyright © 2002, Tjernlund Products, Inc. All rights reserved P/N 8504107OWNER INSTRUCTIONS, DO NOT DESTROYRecognize this symbol as an indication of

Seite 2

9UC1 UNIVERSAL CONTROL CONNECTED WITH A CARLIN 40200, 42230, 48245, 50200, 60200 SERIES OR EQUIVALENT AND A LINE VOLTAGE THERMOSTAT OR AQUASTATAlarmA

Seite 3

10UC1 UNIVERSAL CONTROL OPERATIONAL CHECK1. Confirm power is supplied to the Control. LED #5 (RED) should be on. 2. Activate the UC1 by initiating a

Seite 4

11OPERATION AND DRAFT CHECKThe installer must perform Draft Check, Safety Interlock and Combustion Air Test as outlined in the Venter installation man

Seite 5 - FAN PROVER

SYMPTOM 1: VENTER OPERATES CONTINUOUSLYVerify that Venter is not in post-purge mode which could last up to 16 minutes. A factory post-purge has been

Seite 6 - LED5 LED4 LED2LED3

13LIMITED PARTS WARRANTY AND CLAIM PROCEDURETjernlund Products, Inc. warrants the components of the UC1 for one year from date of installation. This

Seite 7 - THERMOSTAT

1Tjernlund Products welcomes your comments and questions. Address all correspondence to:Customer Service • Tjernlund Products, Inc. • 1601 Ninth Stre

Seite 8

23.All installation restrictions and instructions in the Venter, Inducer or In-Forcer installation instructions must be adhered to when using the UC1.

Seite 9

LED INDICATOR LIGHT STATUS & FAULTSLED #4 & #5 Flashing Alternately = Prover start up fault. Venter Prover contacts “Closed” across P1 &

Seite 10 - UNIVERSAL CONTROLLER

UC1 INSTALLATIONDo not mount the UC1 junction box on a heat source that exceeds 140oF (60oC). Examples of improper mounting surfacesinclude vent pip

Seite 11 - D/N 9183047-4

SEQUENCE OF OPERATION WITH UC1 UNIVERSAL CONTROL:Control signal from thermostat, aquastat, primary control or gas valve is intercepted and routed to t

Seite 12

6UC1 UNIVERSAL CONTROL CONNECTED WITH A SINGLE ZONE 24 VAC THERMOSTATXNRUNIVERSAL CONTROLLERTHERMOSTATGGINTERNAL CONTROLOF FURNACEWCYRRYAS APPLIANCE I

Seite 13

7UC1 UNIVERSAL CONTROL AND WHKE INTERLOCK KIT CONNECTED WITH A MILLIVOLT APPLIANCE XNRUNIVERSAL CONTROLLERD/N 9183046-9CALLAS APPLIANCE INTERLOCK VOLT

Seite 14

8UC1 UNIVERSAL CONTROL CONNECTED TO A GAS OR OIL BURNER WITH AN AQUASTATXNRUNIVERSAL CONTROLLERLINE VOLTAGE OIL BURNERPRIMARY CONTROL, BURNERL1NXLJ1J2

Kommentare zu diesen Handbüchern

Keine Kommentare